3.3
Phase Centre of the FLX100 plus Smart Antenna
The phase centre of the FLX100 plus smart antenna location is at the dot near
the top of the device.
Pole mode
In pole mode, the offset from the phase centre to the top of the pole, includ-
ing the pole adapter mount, is automatically accounted. Make sure to provide
the appropriate antenna height in the software.
Handheld mode
In handheld mode, the location is measured at the dot. Make sure the
FLX100 plus smart antenna is placed properly.
☞
Make sure that Pole or Handheld mode are set correctly in
Zeno Mobile/Zeno Connect settings to change the phase centre posi-
tion.
25029_001
a
a
Phase centre
position
3.4
Setting of the FLX100 plus Smart Antenna
1.
Access the FLX100 plus smart antenna settings.
In
Zeno Mobile
1
.
Go to
Settings
within a project.
2
.
Access
GPS
and then
Antenna
.
In
Zeno Connect
1
.
Open the app and go to
Antenna
.
2.
Tap on the three dots next to the FLX100 plus smart antenna.
3.
Configure the FLX100 plus smart antenna. The following settings
are available:
•
Antenna Height (Only in Zeno Mobile)
•
Antenna Usage
•
Reset Antenna
•
Info
☞
Refer to the according Zeno Mobile and Zeno Connect documenta-
tion for more information.
Phase centre
Step-by-step
18
Operation
