Nomenclature
1 Group selection button
2 Group on/off button
3 Modeling light button
4 Shutter cable socket (2.5mm)
5 Mode Button
6 LCD panel
7 Select dial with buttons
Channel button
HSS button
Beep on/off button
M.Zoom button
Panel Lock/Unlock button (hold 1sec.)
8 Pilot button (Test flash button)
9 Power On/Off switch
10 Unlock button
11 Micro SD card slot
(for firmware update)
12 Strap hole
13 Battery compartment door
14 AF-assist light
(1)
15 Hotshoe contacts
6
1
10
4
13
8
9
5
3
2
7
14
15
11
12
Hold the Channel button for 1 second to change wireless channel.
Rotate the dial
to select Channels 1
(3)
- 8.
(i60A, Di700A and Air R do not support Channel 1. Set all items to
same channel between Channels 2 - 8 for pairing and shooting.)
Hold the Channel button
for 1 second again to confirm.
Change the Channel setting of NAS flashgun(s) same as Air 10s.
For details, please refer to the specific user manual
(2)
.
Channels 1
(3)
- 8
Channel Setting
1
2
HOLD 1 Sec.
Auto Channel
When NAS flashgun(s) are set to Auto Channel mode, it automatically follows the
Channel setting of Air 10s when the users are changing the flashgun(s).
When NAS flashgun is set and fix the Channel setting in Channels 1
(3)
- 8 , they
do not automatically follow the Channel setting of Air 10s. User has to set NAS
flashgun manually in the same channel as Air 10s to keep the pairing.