Leica PINMASTER II PRO, Инструкция по эксплуатации

Страница: 31 / 116

EN
29
Settings
If the device is switched on: Wait until the display goes
out. If the device is not switched on:
Start with Step 1.
1. Hold the auxiliary button
1
depressed (≥3s).
•
USEU
appears.
2. Press the auxiliary button 3x briefly (<2s)
• The display changes.
3. Press the main button
2
to select the desired
setting (
ACD ON
/
OFF
).
4. Save your setting by briefly pressing the auxiliary
button.
• The saved setting is displayed for 4s for
confirmation, then the display goes out.
DISPLAY AND CHECKING OF THE SETTINGS
If you wish to check your settings, you can display the
values at any time.
Press the auxiliary button 1 2x briefly.
• Below the target mark, the following are displayed
in turn for approx, 2s each (possibly instead of the
distance)
– the set units system
(
EU
or
US
)
–
ACD
(only if the function is activated)