Leica mojo3D Direct Section Control –Amazone
7
After connecting a new section control cable it is important that the following settings
are checked:
Latency on and off
Section channels should be set sequentially from left to right. If this causes the
sections not to operate correctly refer to Appendix A
Appendix A
Appendix A
Appendix A –
–
–
– Changing Section
Changing Section
Changing Section
Changing Section
Channels
Channels
Channels
Channels to enter a different configuration depending on the number of sections
being used....
Refer to the Leica mojo3D user manual for instructions on configuring calculating and
updating the latency values.
