manualshive.com logo in svg

Leica IP S, Инструкция по эксплуатации

Поделиться
Скачать
Leica IP S Скачать руководство пользователя страница 66

66

Version 2.0, Revision I 

Cleaning and Maintenance

6

1

3

2

Fig. 60   

24. Clean the instrument completely, as described in this chapter.

Transporting the instrument

If the printer is to be shipped, the storage instructions described above are to be carried out completely.

Then, additionally make the following preparations:

1.  Open the hood 

(

→

 "Fig.  30-

1

")

 of the printer and loosen the screw of the flash cover.

2.  Then take out the flash bulb. For more information, refer to 

(

→

 p. 30 – 4.6 Installing/

exchanging the flash bulb)

.

3.  Close the flash cover and the hood.
4.  Use original packaging and securely screw the printer to the baseplate (see unpacking 

instructions).

5.  Reinsert the transport anchor 

(

→

 "Fig.  11-

1

")

 and secure the hood with adhesive tape.

6.  Make sure that the instrument is only transported upright.

Содержание IP S















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды