Leica iCON gps 70, Руководство пользователя

Страница: 31 / 52

0015832_001
a
b
d
e
f
g
k
i
h
j
l
m
n
c
a iCON gps 70 instrument
b SD card
c GEB331 battery
d GRT146 carrier
e Tribrach
f Height hook
g Tripod
h Satel high power radio
i GEV274 cable
j Power cable delivered with
the Satel high power radio
k Car battery
l CC80 field controller
m USB Memory device
n CBA2 battery for CC80 Field
Controller
1. Set up the tripod.
2. Mount and level the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
4. Place and lock the carrier in the tribrach.
5. Insert the data storage device and battery into the iCON gps 70.
6. Screw the iCON gps 70 onto the carrier.
7. Check that the tribrach is still levelled.
8. Connect the power cable to Satel high power radio and car battery.*
9. Connect the GEV274 cable to the iCON gps 70, to the power cable
connecting to the car battery and to the Satel high power radio.*
10. Insert the data storage device and battery into the field controller.
11. Connect the field controller to the instrument if necessary.
12. To hang the field controller on the tripod leg, use the hook on the
hand strap or use the utility hook. Refer to the User Manual of the
field controller.
13. Insert the height hook into the carrier.
14. Measure the antenna height using the height hook.
15. Press the ON/OFF button on the instrument for at least 2 s to switch
on the instrument.
* applicable only when using high power radio
Equipment setup
iCON gps 70 high
power radio
Equipment setup
step-by-step
Operation 31