7
Leica HI 1210 Water Bath
2. Safety
These Instructions for Use include important instruc-
tions and information related to the operating safety
and maintenance of the instrument.
The Instructions for Use are an important part of the
product, and must be read carefully prior to startup
and use and must always be kept near the instrument.
This instrument has been built and tested in accor-
dance with the safety requirements for electrical
equipment for measurement, control, and laboratory
use.
To maintain this condition and ensure safe operation,
the user must observe all notes and warnings con-
tained in these Instructions for Use.
2.1 Safety notes
These Instructions for Use must be ap-
propriately supplemented as required
by the existing regulations on accident
prevention and environmental safety in
the operator's country.
The instrument's CE certificate can be
found on the Internet at:
http://www.LeicaBiosystems.com
• The safety and caution notes in this chapter must be observed at all times.
• Be sure to read these notes even if you are already familiar with the operation and use of
other Leica products.
• The protective devices located on the instrument and the accessories must not be removed
or modified. Only qualified service personnel authorized by Leica may repair the instrument
and access its internal components.
Residual risks
• The instrument has been designed and constructed with the latest state-of-the-art technol-
ogy and according to recognized standards and regulations with regard to safety technology.
Operating or handling the instrument incorrectly can place the user or other personnel at
risk of injury or can cause damage to the instrument or other property. The instrument may
be used only as intended and only if all of its safety features are in proper working condition.
Malfunctions which could impede safety must be remedied immediately.
• Only original spare parts and permitted original accessories may be used.
The instrument MUST be connected to a grounded power socket. Use only a provided power
cable that is intended for the local power supply.
