GS10/GS15, Operation
32
Equipment setup
step-by-step
Step
Description
1.
Set up the tripod.
2.
Mount and level the tribrach on the tripod.
3.
Ensure that the tribrach is over the marker.
4.
Place and lock the carrier in the tribrach.
GS10
GS15
5.
Screw the GNSS antenna onto the
carrier.
Insert the data storage device and
the batteries into the GS15.
6.
Check that the tribrach is still level.
Press the ON/OFF button on the
instrument for at least 2 s to switch
on the instrument.
7.
Insert the data storage device and the
batteries into the instrument.
Screw the GS15 onto the carrier.
8.
Connect the instrument to the GNSS
antenna using the antenna cable and
port ANT on the instrument.
Check that the tribrach is still level.
9.
Connect the field controller to the
instrument if necessary.
Insert the data storage device and
the battery into the field controller.
10.
To hang the instrument on the tripod
leg, use the hook on the rear of the
unit. Or place the instrument in the
container.
Connect the field controller to the
instrument if necessary.
11.
Insert the height hook into the
carrier.
To hang the field controller on the
tripod leg, use the hook on the hand
strap or use the utility hook. Refer to
the User Manual of the field
controller.
12.
Measure the antenna height using the
height hook.
Insert the height hook into the
carrier.
13.
Clip the antenna arm to the GNSS
antenna.
Measure the antenna height using
the height hook.
14.
Screw the radio antenna onto the
antenna arm.
Press the ON/OFF button on the
instrument for at least 2 s to switch
on the instrument.
15.
Attach the radio in its housing to port
P2 or P3 on the instrument.
-
16.
Connect the radio antenna to the
radio using the second 1.2 m antenna
cable.
-
17.
Press the ON/OFF button on the
instrument for at least 2 s to switch
on the instrument.
-
