Leica GR10, Руководство по эксплуатации

Страница: 131 / 317

Printed Documentation
GNSS management: Smart clean-up
Background Information
The SD card in the receiver can run full if the logging session data files are not removed (e.g. by FTP push or
download).
Smart clean-up
ensures that the SD card will not run full, while preserving the data that has the highest
priority to the user.
Smart clean-up
functionality differs from
auto delete files
.
Auto delete files
is time dependant, whilst
Smart clean-
up
is dependant on the free storage space on the SD card.
Smart clean-up
allows the available SD card space to
be used up completely without the risk of losing important data.
Smart clean-up
will delete files from both active and inactive logging sessions.
Setting Descriptions
The table below describes the fields in the Smart clean up tab.
Setting Description
Enable Smart clean-up
•
Active
When the SD card is almost completely filled by logging
session data, the
Smart clean-up
will first delete the oldest
files with the lowest priority to create space for new files.
(Note: The logging session priority is configured via the first
logging session wizard page,
Create a new logging session ).
Once all data from low priority session is deleted, the
receiver will stop logging data for low priority logging
sessions if the SD card continues to fill up. Next, medium
priority session will be deleted and the receiver will stop
logging medium priority sessions.
Once only high priority sessions remain active, logging will
run in a loop. Only high priority data will be logged and the
oldest files are deleted as soon as necessary. This ensures
that there is always space available for the latest high priority
data.
Activate
Smart clean-up
to always log the most recent and
highest priority logging session data.
•
Inactive
130