Flexacam C3 User Manual Installation 20
Stand-Alone Mode: Installing Optional External Devices
Installing the hand
s
witch /
footswitch
ON/OFF SS
HDMI
SPEED
1
1. Plug the handswitch / footswitch in the
designated connection port at the rear side
of the Flexacam C3 (2.5 mm phone jack).
The optional handswitch /
footswitch can be configured in
the OSD menu. For information
on configuration, refer to the
On-Screen-Display User Manual.
Installing the USB thumb drive
Make sure to read the following instruc-
tions about formatting and handling the
USB thumb drive provided in order to prevent
malfunctions during image acquisition.
File system and formatting:
exFAT or FAT32 file system is required for the
thumb drive to work correctly, as it is detected
by the Flexacam C3. Most USB thumb drives are
factory-formatted with FAT32 so that they can
be used immediately.
If the USB thumb drive is formatted differently,
the Flexacam C3 provides the ability to refor-
mat as exFAT. You have to press "USB Eject"
button but do not remove the stick and then
go to the settings page to format. During this
process all data on the stick are erased.
Make sure that the USB thumb drive is
oriented correctly before inserting it
into the Flexacam C3. If you accidentally insert
the USB thumb drive the wrong way around,
this could damage the camera.
ON/OFF
SS
HDMI
SPEED
1
1. To ensure the quickest possible way to
store data, insert the USB thumb drive with
sufficient free memory in the USB SPEED
port at the rear side of the Flexacam C3. Use
a fast USB thumb drive to ensure a quick
operation.
The optional USB thumb drive can
be configured in the OSD menu.
For information on configuration,
refer to the On-Screen-Display User
Manual.
Содержание Flexacam C3
