Preparation before surgery
Leica FL800 ULT / Ref. 10 744 763 / Version 06
7
Modifying the "Fluorescence Vascular FL800" user preset
If you adjusted the settings of the "Fluorescence Vascular
FL800" user preset to your needs during the application, you
can adopt and save them under a new user name.
X
In the "User settings" menu click on "Save" and then on
"Save as".
X
Select an empty position in the user list.
X
Enter the desired user name via the keyboard.
X
Click on the "Save" button to save your settings under the user
name entered at the desired location.
These settings can later be edited at any time via the User
Settings menu.
Creating your own FL800 user
X
Click on the "Menu" quick access button and select
"User Settings".
X
Select "New User".
X
Open the "Handle Left" or "Handle Right" tab to assign FL800
functions to the handle.
X
In the left selection field, select the "Fluorescence" function
group by Press the "left symbol" or " right symbol", where
symbols are actual GUI TIF used.
X
Assign the function "FL800 Mode On/Off" to any button by
selecting the desired function.
X
Afterwards, click on the label field of the desired button to
assign the desired function.
X
Click on "Save".
X
Select an empty position in the user list.
X
Enter the desired user name via the keyboard, e.g. "icG User".
X
Click on the "Save" button to save your settings under the user
name entered at the desired location.
In the service menu, you can adjust a value fo the maximum
duration of the Leica FL800 mode from 10 to 180 seconds.
Brightness
X
Open the "FL" tab to set the brightness in FL800 mode to an
adequate level.
