Leica CM1860 Скачать руководство пользователя страница 48

Страница: 48 / 108

Version 2.0, Revision N

Daily Use of the Instrument

Fig. 30

Inserting the blades into blade holder CE

Warning

Caution! Microtome blades are extremely sharp!

Note

The blade holder CE can be used either for the low-profile and high-profile blades.

Inserting a high-profile blade

Warning

The safety gloves included in the

(

→

P. 26 – 4.3 Standard delivery - packing list)

must be worn when

inserting the blade!

1. Fold the anti-roll guide system

towards the left – while doing so, hold the lever

NOT

the adjusting screw of the anti-roll guide), so that the height of the anti-roll

guide remains unchanged.

2. Open the clamping lever

by turning it counterclockwise

(

→

"Fig. 31")

3. Carefully insert the blade

from above or from the side between the pressure plate

and the blade rest. Make sure that the blade is inserted so that it is centered and lies evenly

along the ledge (see red arrow in

(

→

"Fig. 31")

Fig. 31

Содержание CM1860













































































































Результаты поиска

Содержание CM1860

Отзывы:

Leica CM1860, Инструкция по эксплуатации, Страница: 48 / 108

Результаты поиска

Содержание CM1860

Отзывы: