Leica Captivate, Техническое справочное руководство

Страница: 850 / 1060

Automatic aiming (search and measurements) can be performed to a prism.
After completing the first measurements to each target point, the measure-
ments to the target points in subsequent sets are automated.
To record oriented grid coordinates, setup and orientation are required before
starting the Measure sets app.
Sets of Angles points are never calculated as an average, even if a measured
point of class Measured already exists with the same point ID.
49.2 Sets of Angles
49.2.1 Accessing Sets of Angles
Select Leica Captivate - Home: Measure sets .
Key Description
OK To select the highlighted option and to continue with the
next panel.
Fn Settings To configure the Sets of Angles app. Refer to "49.2.2 Config-
uring Sets of Angles".
Description of options
Options Description
Create a new group To define the target points. Refer to "49.2.3
Creating New Point Groups".
Select an existing group To select, edit and manage a points group of
the target points for the survey. Refer to
"49.2.4 Managing Existing Point Groups".
49.2.2 Configuring Sets of Angles
Select Leica Captivate - Home: Measure sets . Press Fn Settings .
The explanations for the softkeys given here are valid for all pages, unless oth-
erwise stated.
Automatic aiming
Setup and orientation
Point averaging
Access
Measure sets of
angles
Access
Settings,
Parameters page
850 Sets of Angles - TS