Leica Captivate, Техническое справочное руководство

Страница: 755 / 1060

5. to return to Stake Slope . Stake out the next catch point from this
panel.
The closer the real catch point and the approximated stakeout catch point are,
the closer the projected catch point gets to the real catch point.
45.3 Staking/Checking the Road
45.3.1 The Stake/Check Panel
The Stake Line is shown as example.
Only lines from the selected layer are displayed.
Colour coding
Working job data is displayed in grey. Design job data is displayed in full colour.
Selected line Colour
Working line Orange
Centreline Green
Selected line Thick black
Key Description
Measure For GS:
To start measuring the point being staked. The key changes
to Stop .
For TS:
To measure a distance and store distance and angles.
Stop For GS:
To end measuring the point being staked. When Automati-
cally stop point measurement is checked in GS Quality
Control , General page recording of positions ends automat-
ically as defined by the stop criteria. The key changes to
Store . After ending the measurements, the differences
between the measured point and the point to be staked are
displayed.
Store For GS:
To store the measured point. When Automatically store
point is checked in GS Quality Control , General page, the
measured point is stored automatically. The key changes to
Measure .
Stake,
page
Check panel,
page
Roads - Road 755