Leica Aperio GT 450 DX, Руководство пользователя

Страница: 14 / 90

Aperio GT 450 DX User’s Guide, Revision B © Leica Biosystems Imaging, Inc. 2022 14
Chapter 1: Introduction
Resources
Resource Description
Aperio GT 450 DX User’s Guide Provides reference information and instructions for scanning, troubleshooting,
and maintenance.
Aperio GT 450 DX Quick Reference
Guide Contains quick instructions for scanning, basic troubleshooting, and
maintenance. We recommend keeping this printed guide with your scanner.
An electronic version of the quick reference guide is available from the Help area
on the scanner’s touchscreen interface.
Aperio GT 450 DX IT Manager and Lab
Administrator Guide Contains information and instructions regarding IT administration of the scanner,
including network administration and configuration.
Aperio GT 450 DX Specifications Provides detailed specifications for the scanner.
Instructional videos Provides video instruction on performing various tasks. You can view the videos
from the Help area on the scanner’s touchscreen interface.
Customer Support If you have an issue with the scanner you cannot resolve, contact Leica
Biosystems Technical Services. See
“Customer Service Contacts” on page 11
for contact information .
Training Leica Biosystems offers classroom and virtual training courses. Contact Leica
Biosystems Customer Support for information about training options.
Warnings
This section contains important safety and operation warnings. Also refer to “Scanner Safety Instructions” on page 17 .
Electromagnetic Warnings
If the scanner is used in any manner not specified in this documentation, the protection provided by the equipment may be
impaired.
CAUTION: Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the scanner, including
cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could
result.
This device complies with the emissions and immunity requirements as specified in the EN/1EC 61326 series of Product
Family Standards for a “basic electromagnetic environment.” Such equipment is supplied directly at low voltage from public
mains network. This equipment is not intended for residential use.
This device generates, uses, and can radiate unintentional radio-frequency (RF) energy. If this device is not installed and
operated correctly, this RF energy can cause interference with other equipment. It is the responsibility of the end user to
be sure that a compatible electromagnetic environment for the device can be maintained so that the device operates as
intended.