manualshive.com logo in svg

Leica BIOSYSTEMS SM2000R, Инструкция по эксплуатации, Страница: 42 / 46

Поделиться
Скачать
Leica BIOSYSTEMS SM2000R Скачать руководство пользователя страница 42

40

Instructions for Use V 1.4 RevC – 09/2013

Warranty

Leica Biosystems Nussloch GmbH guarantees that the contractual product 

delivered has been subjected to a comprehensive quality control procedure 

based on the Leica in-house testing standards, and that the product is fault-

less and complies with all technical specifications and/or characteristics 

warranted.
The scope of the warranty is based on the content of the concluded agree-

ment. The warranty terms of your Leica sales organization or the organiza-

tion from which you have purchased the contractual product shall apply 

exclusively.

Service information

If you are in need of technical customer service or spare parts, please contact 

your Leica representative or the Leica dealer where you purchased the unit.
Please provide the following information:

• 

Model name and serial number of the instrument.

• 

Location of the instrument and name of the person to contact.

• 

Reason for the service call.

• 

Delivery date

Decommissioning and disposal

The unit or parts of the unit must be disposed of according to existing local 

applicable regulations.

9. 

Warranty and Service

Содержание SM2000R















































Отзывы:

Нет отзывов