manualshive.com logo in svg

Lehner Lifttechnik Liftboy 1, Руководство пользователя

Поделиться
Скачать
Lehner Lifttechnik Liftboy 1 Скачать руководство пользователя страница 10

 

Liftboy 1/2/3 Handbook

 

Stand 01/2019 

 

Liftboy 1/2/3

 

Plattform Lift 

Seite 10 of 10 

Error search

 

 
1.  Is the connector from the electric power supply put into the electrical socket?  
2.  Does the socket have electricity? 
3.  Electric power supply there? Maybe the fuse is damaged? 
4.  Is the connector connection between the electric power supply and the platform 

made correctly? 

5.  The platform can´t drive upwards but not downwards? 

- 

Check if the contact bar is pressed.   

6.  The platform can´t drive upwards and is on lower stop? 

- 

Check if the ramp is folding fully upwards.   

7.  The platform can´t drive upwards or downward? 

- 

Check if the ramp is folded fully upwards.   

 

Technical data 

 

Platform Typ 1 

 
maximum height of stroke .................................................................................. 600 mm 
load capacity ........................................................................................................ 180 kg 
lifting speed  ...................................................................................................... 10 mm/s 
minimum height (headroom) .............................................................................. 110 mm 
weight .................................................................................................................. 52,5 kg 
electric power supply ........................................ 24 V through transformer on 230 V grid 
Inside dimension (length)  ................................................................................ 1170 mm 
Inside dimension (breadth)  ............................................................................... 710 mm 
outside dimension (length)  .............................................................................. 1180 mm 
outside dimesnion (breadth)  ............................................................................. 810 mm 

 
Platform Typ 2 and 3 

 
maximum height of stroke ......................................................................... 830 / 970 mm 
load capacity  .............................................................................................. 300 / 240 kg 
lifting speed ....................................................................................................... 10 mm/s 
minimum height (headroom)  .................................................................... 120 / 135 mm 
weight  .................................................................................................................. 100 kg 
electric power supply ........................................ 24 V through transformer on 230 V grid 
inside dimension (length)  ................................................................................ 1495 mm 
inside dimension (breadth)  ............................................................................... 785 mm 
outside dimension (length)  .............................................................................. 1505 mm 
outside dimension (breadth)  ............................................................................. 890 mm 
 
 

 

Содержание Liftboy 1











Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды