BD
A M610 T
A03 / 2019-09 (GB)
9
All figures in mm.
Installation instructions:
• Do not use countersunk head screws when installing the locker lock, the keypad and the striker plate.
• Pan head screws (3,5 x 13 mm) are recommended for mounting the striker plate (not included)
• A splash water and dust protection can only be ensured if the lock and the keypad lie completely on the door
surface (except Omega-profiles).
• The locker lock M610 is available in two versions (right or left mounting).
• Please ensure the correct installation position of the lock and the keypad.
• Tighten the screws hand-tight.
✓
✓
Right mounting (front view)
Left mounting (front view)
In order to attach the cover to the already mounted keypad unit TA03, insert the two guide lugs of the cover into the
recesses and press the cover until it clicks into place.
