BDA-M400_Smart Secure_GB (Rev-03) 12-07-2021
5
GETTING STARTED / CHANGING BATTERIES
Before initial commissioning, ensure that all required accessories and attachment parts are available.
Rechargeable batteries in the operating devices (smartphone/tablet) as well as batteries for the furniture
locks should have sufficient energy. Follow the individual sections in the operating instructions step by step.
Only install the furniture lock in the furniture when it is unlocked.
Use only
LR6, AA, alkaline
type batteries. Make sure that the polarity is correct!
Rechargeable batteries, zinc-carbon batteries or lithium batteries are not permitted!
MONITORING THE STOP POSITION OF LOCK
The M400 Smart Secure furniture lock is equipped with a sensor for the stop position of the lock.
If the lock does not reach the stop position following a closing command, an optical warning message is
issued (see test function). In addition, you will receive a warning on your smartphone/tablet.
If the lock is already in stop position upon receiving a closing command, there is no additional closing
movement.
Loosen the screw.
Open the battery
compartment lid.
2
Insert / replace
the batteries.
3
Close the battery
compartment lid.
Fit the fixing screw.
Block
the lock
2
Closing command
from the device
3
Warning
signal lights up
Test function
Optical warning
on the display unit
LED colour:
RED
Stop position
of lock not
reached
The closing
operation could not
be completed.
Locking bolt is
blocked.
