22
LEHLE GmbH · Germany · www.lehle.com · [email protected]
HOW TO DO THIS
1. Connect your instrument to the input
socket (1) of the LEHLE SUNDAY DRIVER
SW II.
2. Connect the output (4) of the LEHLE
SUNDAY DRIVER SW II to the input sock-
et of the LEHLE P-SPLIT III.
3. Connect your amplifier to the DIR out-
put of the LEHLE P-SPLIT III.
4. Connect the ISO output to the input of
your audio interface.
5. Switch the S/D selector (2) to the D po-
sition for “Driver”.
6. Activate the LEHLE SUNDAY DRIVER
SW II via the foot switch (8).
7. Adjust the Gain controller (7) so that
your amplifier sounds as good as usual.
8. Done!
The LEHLE P-SPLIT III also has other func-
tions, such as inverting the phase at the
ISO output or an extra galvanic separa-
tion of the signal to get rid of ground loop
noise.
Please read the LEHLE P-SPLIT III operat-
ing manual for a precise explanation of
the use and effects of those features.