13
LEHLE GmbH · Germany · www.lehle.com · [email protected]
D I R
I S O
M A D E I N G E R M A N Y
P- S P L I T
M A D E I N G E R M A N Y
S U N D AY D R I V E R
S D
/
D I
DEVICE CONNECTION
LEHLE P-SPLIT III
DEVICE CONNECTION
LEHLE SUNDAY DRIVER II
Input
Input
Output LEHLE
SUNDAY DRIVER II
Instrument (passive)
100 m balanced
Output
Output
Amplifier
Input
LEHLE P-SPLIT III
ISO
If you play on very big stages and need
long cables over a large distance we
recommend transmitting the signal bal-
anced. From 10 meters on it can make
sense.
Tap the output of the LEHLE SUNDAY
DRIVER II via TRS-TRS cable, send it bal-
anced and loss-free to a LEHLE P-SPLIT III
which unbalances it again.
HOW TO DO THIS WITH A LEHLE P-
SPLIT III
1. Connect your instrument to the Input
socket (1).
2. Use a balanced TRS-TRS cable and
connect it to the Output socket (3) of the
LEHLE SUNDAY DRIVER II and the input
of the LEHLE P-SPLIT III.
3. Use a short unbalanced TS-TS cable to
connect the ISO output to the amplifier.
4. Switch the S/D selector (2) in the D po-
sition, for “Driver“.
5. Turn the Gain controller (6) to the left
limit (“7 o’clock position“).
6. Press the DI switch (4).
7. Done!
