Lehle Mono Volume, Руководство пользователя

Страница: 15 / 16

13
Many effects, like delay, chorus or reverb sound
much better when they are blended with the dry
instrument signal. This can also be done with the
Lehle Mono Volume . However, you will need
a mixer - in our example, we are using a Lehle
Parallel M .
Device connection:
Lehle Mono Volume
Input (1)
→
Instrument
Output DIR (2)
→
Input Lehle Parallel M
Output VOL (4) → Input effects unit
Lehle Parallel M
Input
→
Output DIR (2)
Return R → Output effects unit
Output
→
Amp
How to do this:
1. Connect your instrument to the input jack (1) of
the Lehle Mono Volume .
2. Connect the DIR out (2) to the input of the
Lehle Parallel M .
3. Connect the VOL jack (4) to the input of the
effects unit.
4. Connect the output of the effects unit to the
return jack of the Lehle Parallel M .
5. Connect the output of the Lehle Parallel M to
the amp.
6. Adjust the maximum volume for the input of
your effects unit with the gain controller.
7. Use the MIX controller on the Lehle Parallel
M to set the required mixing ratio for the effects
signal and the dry signal while the Lehle Mono
Volume is in level position.
8. If necessary, press the phase switch on the
Lehle Parallel M .
9. There you go!