manualshive.com logo in svg

LegWorks ATK HydraPro, Инструкция по эксплуатации

Поделиться
Скачать
LegWorks ATK HydraPro Скачать руководство пользователя страница 5

English

ATK HydraPro  |  

Instructions for Use

© Copyright LegWorks 2019

HYD-IFU-02

5

DESCRIPTION & PURPOSE

The primary components and adjustments are identical across all knee 

versions. Specific differences in components, features and adjustments are 

indicated within the document by notation of the relevant product code.

INTENDED USE:

•   These instructions are for use by the prosthetist fitting and/or

    maintaining the device.
•   Both device models are intended for single person use.
•   Both device models are to be used exclusively as part of an external
    lower-limb prosthesis.
•   Both device models are developed for everyday use and must not be

    used for unusual activities, such as extreme sports.

•   HYD-PA-02 is designed exclusively for Knee Disarticulation or
    Transfemoral amputees.
•   HYD-SF-02 is designed exclusively for Transfemoral amputees.

Ensure that both the prosthetist and the user have read and understood 

the 

Instructions for Use

, especially the safety information. If the user experiences 

any issues with the device, they should immediately contact their prosthetist. 
If the prosthetist experiences any issues, immediately contact LegWorks.

Last updated: 2019-08-01

•   Please read this document carefully. 
•   The safety instructions are to be followed by both the prosthetist and
     the user.

PRODUCT CODES

This instructional manual covers all current versions of the ATK HydraPro:

Product Name

Product Code

ATK HydraPro

HYD-PA-02

ATK HydraPro with Stance Flexion

HYD-SF-02

Содержание ATK HydraPro

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды