Ins
tallation Ins
tructions
Please read all instructions before installing
DESCRIPTION AND OPERATION
The RS-350-N PIR Dual Relay Universal Application Wall Switch Vacancy Sensor
is designed to replace two single pole standard residential switches or one
combination switch (“double switch”). It is ideal for living and dining rooms, family
rooms, bedrooms, bathrooms and any other indoor area in a residential space
where occupancy sensor-based manual ON/OFF control of two different loads
(i.e., a lamp and a fan) from a single location is desirable.
Like a standard combination switch, you press either or both of the two ON/OFF
buttons to turn lights and/or fans (controlled loads) ON and OFF. Unlike a
standard combination switch, the RS-350-N automatically turns OFF the
controlled loads after the coverage area has been vacant for a period of time
(Time Delay). If motion is detected within 30 seconds after they automatically turn
OFF, the RS-350-N automatically turns the loads back ON.
While the sensor is factory preset as a Vacancy Sensor with manual-ON
operation, it can be adjusted to work as an Occupancy Sensor that turns the
controlled loads ON automatically upon detection of occupancy in the area.
Lighted Switch
To help you locate the RS-350-N in a dark room, an amber LED illuminates
each of the ON/OFF buttons while the controlled loads are OFF. When one of the
controlled loads is ON, the corresponding LED is OFF.
Nightlight
While the controlled load connected to relay #1 is OFF, the nightlight built into the
RS-350-N is ON. When this load is ON, the nightlight is OFF.
Operating Modes
There are two operating modes that can be selected independently for each relay
during set up:
MODE 1 Vacancy sensor
(Manual-ON/OFF, Auto-OFF): The user must press the
ON/OFF button to turn the load ON. The RS-350-N keeps the load ON until no
motion is detected for the selected time delay period (adjustable from 15 seconds
to 30 minutes). There is a 30 second reset delay. If motion is detected during this
time, the sensor turns the load back on automatically. After the reset delay time
has elapsed, the ON/OFF button must be pressed to turn ON the load.
MODE 2 Occupancy sensor
(Auto-ON/OFF with manual control and reset to auto
after 5 minutes of vacancy): The load turns ON and OFF automatically based on
occupancy detection. The RS-350-N keeps the load ON until no motion is detected
for the selected time delay period. If the load is turned OFF manually, automatic-
ON is re-enabled when no motion is detected for 5 minutes. This prevents the
load from being turned ON after it was deliberately turned OFF.
RS-350-N
PIR Dual Relay Universal Application
Wall Switch Vacancy Sensor
with Manual ON/OFF
Lens
ON/OFF button for Relay 1
ON/OFF button for Relay 2
SPECIFICATIONS
Voltage ............................................................... 120VAC, 60Hz
Load rating for each relay
Incandescent or fl uorescent ............................ 0-600 Watts
Fan motor .................................................................. 1/6 hp
Time Delay Adjustment .................... 15 seconds to 30 minutes
Light Level Adjustment ....................................... 10 fc to 150 fc
Environment ..................................Residential Indoor use only
Operating Temperature ............... 32° to 131°F (0° to 55°C)
Humidity ...................................... 95% RH, non-condensing
Tools Needed
Insulated
Screwdriver
Wire
Strippers
Santa Clara, CA 95050
Call 888.817.0571 for Technical Support
Nightlight
