6
No: IS-00722 Rev. 2
EQUINOX 73-III MOUNTING RING ADJUSTMENT TOOL
Locate this tool-card shipped with the Equinox 73-III. Inside the wall box is a rectangular ring that must be parallel with the wall
surface and 1” behind the wall surface on the left and right sides. Loosen the two inside screws and use this tool to set the mounting
ring depth at 1”.
SHEETROCK
1”
(25mm)
MOUNTING
BRACKET
MOUNTING
BRACKET
SPRING CLIP
SPRING CLIP INSTALLATION
Loosen this screw inside of the wall box
on both sides and slide the mounting
bracket in or out for proper depth
When the Equinox 73-III touchscreen is inserted, the back of the touchscreen’s face is flush with the sheetrock and the spring clip is
securely behind the mounting bracket. If the screen clip is not far enough behind the mounting bracket, then the mounting bracket’s
depth must be moved out, toward the front of the wall box, until the spring clip has a secure grip when the Equinox 73-LCAP
touchscreen is fully inserted into the wall box.
Proper depth from
bracket to front of
finished wall is approx.
1” or 25mm
EQUINOX 73
MOUNTING RING
ADJUSTMENT TOOL
