LEGRAND Valena Allure Series, Руководство пользователя

Страница: 13 / 44

DEL
035 51
2.1
Mode of operation
Your Scenario Control can program up to four scenarios, saving them
in a Scenario Module (F420) which has been enabled for programming.
2.1.1 To program a scenario
To save one or more scenarios:
In the Scenario Module press the pro-
gramming enabling pushbutton.
Its led becomes green:
the module is enabled.
Press the key to program for more than
four seconds.
When the led lights up release the key.
The led flashes to indicate that the pro-
gramming mode has been activated.
t > 4 s
Set the sequence of commands which
make up the scenario.
DEL
035 51
Repeat the sequence to add, edit or cancel a scenario command.
Press the key to end the program-
ming.
Press the corresponding key to acti-
vate the scenario required.
on
on
2 Use
At the end of the programming you should disable the possibility
of editing the scenarios by pressing the Scenario Module (F420)
enable/disable pushbutton. The led becomes red.
Lumière Cinéma
Nuit Relax
Lumière Cinéma
Nuit Relax
Lumière Cinéma
Nuit Relax
Scenario control
13
EN
LE08590AA_AS.indb 13 2015.10.03. 9:41