Working with EasyIP Microphones
To fine-tune EasyIP microphones, you will need the free Vaddio Dante Interface Application. The Audio
page of the host device’s web interface provides volume controls and muting for individual microphones.
About the Vaddio Dante Interface Application
EasyIP and Dante technologies use differing communication protocols. This means:
n
Controls for EasyIP microphones and speakers are not available from the web interface of the EasyIP
host device. .
n
The Vaddio Deployment Tool does not recognize EasyIP microphones and speakers as Vaddio
devices.
To work with EasyIP microphones or speakers, you will need the Vaddio Dante Interface Application,
which provides access to microphone and speaker adjustments and firmware update capability. This is
available as a free download from the Vaddio resources page at
https://www.legrandav.com/en/tools_
and_training/tools/vaddio_tools
. We update this tool with new features and enhancements from time to
time. Please be sure you have the latest version.
Things to know about the Vaddio Dante Interface Application:
n
The application only detects EasyIP microphones and speakers.
n
The application does not scan across subnets. To use it, your computer must be on the same subnet
as the microphones and speakers.
Note
The Vaddio Dante Interface Application has been updated to allow you to disable/enable the Mute button
and audio meter on tabletop microphones. Some of the screen shots in this section are from an older
version and do not reflect this enhancement.
Fine-Tuning EasyIP Microphone Performance
When you open the Vaddio Dante Interface Application, it displays the IP addresses of the EasyIP
microphones on the subnet that your computer is on. Select a microphone to enable its controls.
The adjustments and settings are generally the same as for the EasyMic family CeilingMIC and
TableMIC microphones.
17
Complete Manual for the EasyIP CeilingMIC/AMP D Network-Connected Amplifier and Overhead Microphone
