Basic Connections – EasyIP CeilingMIC D
This is a simple installation for a medium to large conference room, using the EasyIP CeilingMIC D with an EasyIP
system. In this installation, the EasyIP CeilingMIC D microphones pair to an EasyIP Mixer over the network. The
EasyIP Mixer also manages speakers and video, and originates a USB 3 stream, making audio and video available
to soft conferencing applications.
EasyIP CeilingMIC D microphones can also be used with other devices that support Dante connectivity.
Note
Because EasyIP CeilingMIC D microphones are not directly connected to the device that manages them (an
EasyIP Mixer in the diagram above), they must be paired to the device in order to operate.
To work with EasyIP CeilingMIC D and other Dante devices, you will need to download and install the free Dante
Controller application from Audinate Pty. Ltd.:
www.audinate.com/products/software/dante-controller
Things to know about Dante Controller:
n
Dante Controller does not work over Wi-Fi or across subnets. Your computer must be on the same subnet as
the Dante devices you need to work with.
n
Device names and IP addresses shown in Dante Controller do not match the corresponding information shown
in devices' web interfaces.
Audinate provides information, training, and documentation for Dante technology on their website.
Use, Storage, and Care
Keep this device away from food and liquids. Do not attempt to take this product apart. There are no user-
serviceable components inside. Do not operate or store the device under any of the following conditions:
n
Temperatures above 104° F (40° C) or below 32° F (0°C)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
Dry environments with an excess of static discharge
Do not let cats play with overhead microphones, as their claws could snag the fabric.
Installing CeilingMIC and EasyIP CeilingMIC D Overhead Microphones
7
