Doc No. FM0851 issue A Page 6
Registering a Heat Detector onto a
Touchsafe Pro
Nursecall system
1. Put the Touchsafe Pro Master Panel into Telecare registration mode; touch the screen and Logon as an Engineer or a Manager
(password required),
then from the main menu page touch the
Telecare
button to open the screen shown below…
2. Enter the heat detector
ID…
3. Press the
Close
button to exit Telecare mode and the Nursecall panel is now back in normal operating mode.
4. Activate the heat detector and check the call is
displayed on the Nursecall panel like this…
The screen banner is
red
for a heat alarm call (
Touch the banner to display notes
).
A heat alarm call cannot be accepted or silenced from the screen.
You must visit the appropriate Nursecall Call Point to cancel the call.
Deleting a Heat Detector from a
Touchsafe Pro
Nursecall system
Select the heat detector ID to be deleted from the
Delete Telecare Device
pull-
down list box (prefixed with a “T
48
”).
Details of the heat detector selected will be displayed in the
Room
,
House Code
and
ID
boxes below.
If the details shown are correct press the
Delete
button.
Press the
Close
button to exit.
Refer to the Touchsafe Pro Display Panel user guide (Doc No. FM5505) provided with the Nursecall system for
more information.
Tynetec and Aidcall operate a policy of continuous improvement and reserve the right to change product specifications without notice.
If any variation to the details contained in this document are suspected please contact Tynetec’s customer support dept on 01
670 352371.
The 8 digit ID is printed on a label on the rear of the heat detector.
Note: this ID will always start with
48
xxxxxx.
Touch the
Add Telecare Device
box then use the on-screen keypad to enter the ID.
Hint: enter a zone in the
Filter
box to narrow the search for the room (see below).
Select the users Call Point ID from the
Room
pull-down list box then press
Save
.
Note: this is the room unit that will be used to cancel the call.
Use keypad to enter
8 digit ID here
Select the relevant
Call Point ID here
Save when done
Close to exit mode
On-screen keypad
CALLING
CANCEL
HC 345 ID 001
Press the
LIGHT GREY
button to cancel the call
ZXT493
W66794
Ser: 10157951
ID: 48046561
EExxxx V1.00A
MC
