Doc No. FM0725 issue C Page 4
Registering a Gas Detector onto an
Advent xt
warden call system
1. Pu
t the Advent xt system into radio device learn mode…
2. Activate the gas
detector…
3.
Exit the Advent xt system radio device learn mode…
4. Activate the gas detector and check a gas alarm call is reported on the warden call system.
Deleting a Gas Detector from an
Advent xt
warden call system
Press the
LINE
key and wait for the “
Ready
” prompt.
Enter
5 0 0 1
followed by the
key.
Enter the flat number the gas detector is being deleted from followed by the
key.
Activate the gas detector to be deleted.
W
ait for the “
Pendant Disabled
–
Enter Flat
” prompt.
Press the
#
key and wait for the “
Ready
” prompt
, then press the
LINE
key to clear the connection.
Refer to the Advent xt operators manual (Doc No. FM0420) provided with the warden call system for more
information on programming and testing radio devices.
Using the Manager’s DECT telephone;
Press the
LINE
key and wait for the “
Ready
” prompt.
Enter
5 0 0 0
followed by the
key.
Enter the flat number the gas detector is being installed in followed by the
key.
You now have 1 minute to activate the gas detector.
“
Ready”
Using the Manager’s DECT telephone;
Press the
#
key and wait for the “
Ready
” prompt.
Press the
LINE
key to clear the connection and the warden call system is
now back in normal operating mode.
Press and hold the TEST/HUSH button for more than 20 seconds,
the horn will sound and the
GREEN
and
RED
lights will flash.
W
ait for the “
Enter Location Code
” prompt
then press
0
(no location) followed by the
key.
W
ait for the “
Pendant Enabled
–
Enter Flat
” prompt.
“
Ready”
