LEGRAND Raritan SRC-0100 Скачать руководство пользователя страница 24

Страница: 24 / 698

Chapter 3: Initial Installation and Configuration



The two Ethernet ports must be connected to different subnets.

See

Dual Ethernet Connection

(on page 14).



The "green" Ethernet port labeled "ETH 10/100/1000" supports

up to 1000 Mbps so it is highly recommended for network
connection.

Connect the other end of the cable to your LAN.

Below illustrates the ETHERNET ports. Note that the port locations
on your SRC may differ.

Warning: Accidentally plugging an RS-232 RJ-45 connector into the
Ethernet port can cause permanent damage(s) to the Ethernet
hardware.

To make a wireless connection:

Do one of the following:



Plug a supported USB wireless LAN adapter into the USB-A port

on your SRC.



Connect a USB hub to the USB-A port on the SRC. Then plug the

supported USB wireless LAN adapter into the appropriate USB
port on the hub.

See

USB Wireless LAN Adapters

(on page 12) for a list of supported

wireless LAN adapters.

USB Wireless LAN Adapters

The SRC supports the following USB Wi-Fi LAN adapters.

Wi-Fi LAN adapters

Supported 802.11
protocols

SparkLAN WUBR-508N

A/B/G/N

Proxim Orinoco 8494

A/B/G

Содержание Raritan SRC-0100


























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Raritan SRC-0100

Отзывы:

LEGRAND Raritan SRC-0100, Руководство пользователя, Страница: 24 / 698

Результаты поиска

Содержание Raritan SRC-0100

Отзывы: