SRC Quick Setup Guide
2
SRC_QSG_0A_3.5.10_E
255-80-0063-00 RoHS
2.
Screw the L-bracket to the device and ensure the bracket
is fastened securely.
3.
Repeat Steps 1 to 2 to screw another L-bracket to the
other end of the device.
4.
After both L-brackets are installed, fasten the device to
the rack, using rack screws, through two identical round
holes of each L-bracket.
QS Rule
0U Rackmount Method
To mount SRC like a 0U device:
1.
Align the two round holes of the L-bracket with two of the
screw holes on the top of the SRC device.
2.
Screw the L-bracket to the device and ensure the bracket
is fastened securely.
3.
Repeat Steps 1 to 2 to screw another L-bracket to the
other end of the device.
4.
After both L-brackets are installed, fasten the device to
the rack, using rack screws, through slots of each
L-bracket.
QS Rule
Connection Ports for Sensors, Door Handles, and
Assets
If you purchase
Optional Accessories
(on page 1), make sure
you connect them to the correct port on the SRC, or it is likely
damages may be caused to SRC and/or connected
accessories.
SRC models Connection
ports
Supported accessories
All models
SENSOR port
(yellow)
Raritan's DX or DX2
sensors or actuatorsf
SmartLock kit (that is,
DX2-DH2C2)
Refer to "FEATURE 1"
below.
Models with
onboard door
handle ports.
For example,
SRC-0102.
Door handle
ports, and
contact closure
terminals
Raritan's door handles
Third-party contact
closure detectors
(optional)
Refer to "FEATURE 2"
below.
All models
FEATURE port
(red)
Raritan's asset
management strips
Refer to "FEATURE 3"
below.
QS Rule
FEATURE 1: Support for DX and DX2
Environmental Sensors/Actuators
Raritan's DX or DX2 environmental sensor packages are
required for SRC to detect the surrounding condition like the
temperature, and/or to control a system or mechanism like
door handles.