LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 718 / 911

Chapter 9: Using the Command Line Interface
698
Power Control Operations
This section applies to outlet-switching capable models only.
Outlets on the PX3TS can be turned on or off, or power cycled through the CLI.
Besides, you can cancel the power-on process while the PX3TS is powering on
ALL outlets.
You must perform this operation in the administrator mode . See Different CLI
Modes and Prompts (on page 527).
Turning On the Outlet(s)
This section applies to outlet-switching capable models only.
This command turns on one or multiple outlets.
# power outlets <numbers> on
To quicken the operation, you can add the parameter "/y" to the end of the
command, which confirms the operation.
# power outlets <numbers> on /y
Variables:
•
<numbers> is one of the options: all , an outlet number, a list or a range of
outlets.
Option Description
all Switches ON all outlets.
A specific outlet
number Switches ON the specified outlet.
A comma-
separated list of
outlets Switches ON multiple, inconsecutive or consecutive
outlets.
For example, to specify 7 outlets -- 2, 4, 9, 11, 12, 13
and 15, type:
outlets 2,4,9,11-13,15
.
A range of
outlets with a
hyphen in
between Switches ON multiple, consecutive outlets.
For example, to specify 6 consecutive outlets -- 3, 4, 5,
6, 7, 8, type:
outlets 3-8
.