LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 31

Страница: 31 / 284

Appendix A: Getting Started

Automatic Reconnection

If your connection to the client fails, an automatic reconnection will be

attempted in most cases. Reconnection is attempted at 30 second intervals

until a successful connection is made.
A message appears when the connection drops with information about

reconnection timing and options to cancel or quit.
Automatic reconnection is not attempted when the connection failure is due

to:

•

Configuration error detected. Certificate must be uploaded.

•

User authentication failed.

•

User authorization failed.

•

User has been actively disconnected by an administrator.

•

KX device version not supported by the client.

Note: In FIPS mode, the User Station CANNOT connect to any targets on a KX3

or CC-SG with Security setting TLS 1.2 only.

Basic Network Settings

The Dominion User Station default network configuration is set to Automatic

(DHCP) for both IPv4 and IPv6 settings.
This section describes basic network configuration only. For details, see

Network Connections - Ethernet

(on page 224).

To configure basic network settings:

Choose Main Menu > System Settings > Network.

In the Network Connections dialog, two default network connections are

available for two LAN ports.

Ethernet 1

is for LAN port 1, and

Ethernet 2

for the other.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды

LEGRAND Raritan Dominion User Station, Руководство пользователя

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды