LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 234

Страница: 234 / 284

Appendix A: System Settings

224



Locate Pointer: Select this option to show the position of the pointer

when the Control key is pressed.



Pointer Speed: Adjust Acceleration and Sensitivity.



Drag and Drop: Adjust the threshold for drag and drop operations.



Double-Click Timeout: Adjust from short to long. Double-click the

lightbulb graphic to test the setting.

Click Close to exit the dialog.

Network

Network Connections - Ethernet

You can connect the two LAN ports of the User Station to the same or diverse

subnets.
If you have connected both LAN ports to the network(s) when turning on or

restarting the User Station, the User Station

randomly

selects one of the

network connections as the default one. However, if you change the network

settings of either or both connections, the "final" one that is changed will

automatically become the default connection.

Note: You can identify the default connection in the Connection Information

dialog. See

Network Icon

(on page 241).

By default, both IPv4 and IPv6 addressing are enabled for both LAN ports, and

the following are the default network settings:

•

IPv4:

Automatic (DHCP)

•

IPv6:

Automatic

You can also set additional ethernet options, such as MTU and Wake on LAN:

See

Ethernet Settings

(on page 233). You can also configure bond devices: See

Network Connections - Bond Connections

(on page 235).

To change network settings:

Choose Main Menu > System Settings > Network. The Network

Connections dialog appears, with two factory default connections listed for

two LAN ports.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды

LEGRAND Raritan Dominion User Station, Руководство пользователя

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды