LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 137

Страница: 137 / 284

Appendix A: Setting User Preferences

127

Hotkeys and Gestures

You can enable, disable and customize hotkeys and gestures to control the

User Station, manage windows, or control KVM Client functions. These hotkeys

and gestures are executed on the User Station rather than being transmitted to

any target servers you are operating. Many functions are programmed and

enabled by default.
For a complete list of pre-programmed hotkeys of the User Station, go to Main

Menu > Help > Help on Hotkeys, and see

Help on Hotkeys

(on page 9).

There are several categories of hotkeys and gestures:

•

User Station Functions Hotkeys

: Configure hotkeys that are always

processed locally by the User Station desktop. They are not sent to a target

server if you use them from within a KVM session. If you want to use any

of these key combinations, such as Alt+Tab or Ctrl+Alt+Delete, in KVM

sessions, you should make sure that key combination is not assigned in this

category, or disable that function it is assigned to.

•

Window Management Hotkeys and Gestures:

Configure hotkeys to close

windows, switch between windows, or move them around on your

desktop.



When Switch Keys is enabled, you can use Shift + W Arrow to

switch between open windows.



Move Keys are key combinations that move the foreground window

around on the desktop. You can disable this function. See

Move Keys

(on page 129).



When Dragging with Alt Key is enabled, you can drag windows around

on the Dominion User Station desktop using the mouse. Disable this

feature if you want Alt Drag to apply to the target server.

•

KVM Client Hotkeys:

Configure hotkeys for functions within the KVM

Client. Note that if you disable the hotkey for single mouse mode, this

function is disabled.

•

KVM Port Hotkeys:

Hotkeys that have been configured for ports appear

here.

•

Target Access Hotkeys

: Configure hotkeys for functions within the SSH,

VNC and RDP clients. Hotkeys that have been configured in those clients

appear here.

•

Window Layout Hotkeys

: Configure hotkeys to manage your window

layouts. See

Window Layouts

(on page 130).

To configure hotkeys and gestures:

Launch the User Station Configuration window.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 137 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: