LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 19

Страница: 19 / 284

Appendix A: Introduction

Help on Hotkeys

You can also access this list of pre-programmed and user-configurable hot

keys for the User Station in the Main Menu.

•

Choose Main Menu > Help > Help on Hotkeys.

Hotkeys in the Dominion User Station

Dominion User Station has a number of pre-defined and user configurable

hotkeys implemented to open tools, move or resize windows, open target

windows or perform some operations.
Most of the desktop hotkeys can be configured by the user (Preferences >

Hotkeys), including the possibility to disable them. The key combinations listed

below are the factory defaults for these hotkeys. This guide dos not mention

operations whose hotkeys are disabled by default.

Dominion User Station Functions

•

Ctrl + Alt + N

Launch the Dominion User Station Port Navigator

•

Ctrl + Alt + C

Launch the Dominion User Station Configuration

•

Ctrl + Alt + L

Lock the Dominion User Station Screen

•

Ctrl + Alt + Del

Shut down or restart the Dominion User Station

Window Management Functions

The following hotkeys are useful to close the currently active window or switch

between windows.

•

Alt + F4

Close the active window.

•

Alt + Tab

Switch focus to the next window.

•

Shift+Alt+Tab

Switch focus to the previous window.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 19 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: