2
www.qmotionshades.com Pensacola FL, 32514 1 -877-849-6070
PN 9000225
UNLEARN A REMOTE FROM SHADE
(Shade at Upper Limit)
1.
Use a paperclip to
PRESS
the
PROGRAM
button on
__
back of the remote
2. PRESS
and
RELEASE
the
DOWN
button
__
(Shade will JOG in response)
3. TUG
the shade
6-10 inches
__
(Shade will JOG and move to the Upper Limit)
REMOVE REMOTE FROM NETWORK
1.
Use a paperclip to
PRESS
the
PROGRAM
button on
__
back of the remote three (3) times quickly
SETTING UPPER AND LOWER LIMITS / LEARNING A NEW POSITION
1. PRESS
and
RELEASE
the
(UP, DOWN,
or
PRESET)
button that will be programmed
__
(Shade will move to selected position)
2. PRESS
and
HOLD
the same
(UP, DOWN,
or
PRESET)
button
UNTIL
the shade
JOGS
3. TUG
shade
6-10 inches
(Shade will JOG in response)
4. ADJUST
shade to desired position (Manually roll shade by hand if necessary)
5. PRESS
and
HOLD
the same
(UP, DOWN,
or
PRESET)
button (Shade will JOG when learned)
IMPORTANT
Lower Limit Position must be set prior to using the
PRESET
positions
(20%, 40%, 60%, 80%)
. These positions are based on
the Lower Limit Position of the shade. When learning new positions, the button currently being programmed (after Step 3.
TUG) will not send commands to the shade. After Step 5 all buttons resume full functionality.
Example 1:
When learning a new Upper Limit Position, the
UP
button is semi-disable. Only by pressing the
UP
button
3
times will the shade move to the up position (or manually roll the shade up by hand).
Example 2:
When learning a new Lower Limit Position, the
DOWN
button is disabled. The shade can still be adjusted
using the
UP
button (or manually roll the shade by hand).
BATTERY REPLACEMENT
1. PRESS
and
RELEASE
the
DOWN
button to unroll shade
2. UNROLL
the
FABRIC ROLL TUBE
to expose the battery
__
cover
3. REMOVE
BATTERY COVER
4. REPLACE
batteries with
NEW D-CELL
Alkaline batteries
5. INSTALL BATTERY COVER
6. PRESS
and
RELEASE
the
UP
button to roll fabric back
__
onto tube
12345
CH
Front
UP
DOWN
CHANNEL
20%
40%
60%
80%
Back
PROGRAM
Pin Hole
QdR Remote
When unrolling the shade
to expose battery cover, the shade
will try to roll upward. Hold the
FABRIC ROLL TUBE
firmly in
place to resist the initial upward movement, then continue to
unroll the
FABRIC ROLL TUBE
to expose battery cover.
