13
Problem
Cause
Solution
The Learn indicator light comes on for
5 seconds
Learning is impossible.
Install compatible products
The Learn indicator light comes on for
10 seconds
The number of transmitters saved is
greater than 32.
Delete unused scenarios.
During learning, the Learn indicator
light stops blinking.
If there is no activity, the learning
mode shuts down after 10 minutes.
The control button was not pressed in
the minute after pressing Learn.
Restart the learning procedure.
When saving the scenario, the Learn
indicator lights of some receivers do
not go off.
Incorrect communication between the
products.
Check the wiring (connection).
Check for the presence of a possible
disruptive device (*).
Isolate it with a filter.
(*) Examples of a disrupter: electronic transformers, switch-mode power supply.
Operation
(continued)
