Ju
ne
20
18
Legrand PDU User Guide 351
config:#
user defaultpreferences preferredTemperatureUnit F preferredLengthUnit feet
preferredPressureUnit psi
Results:
The default temperature unit is set to Fahrenheit.
The default length unit is set to feet.
The default pressure unit is set to psi.
Role Configuration Commands
A role configuration command begins with
role
.
Creating a Role
This command creates a new role, with a list of semicolon-separated privileges assigned to the role.
config:#
role create <name> <privilege1>;<privilege2>;<privilege3>...
If a specific privilege contains any arguments, that privilege should be followed by a colon and the
argument(s).
config:#
role create <name> <privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Variables:
<name> is a string comprising up to 32 ASCII printable characters.
<privilege1>, <privilege2>, <privilege3> and the like are names of the privileges assigned to the role.
Separate each privilege with a semi-colon. See
All Privileges
(on page 351).
<argument1>, <argument2> and the like are arguments set for a particular privilege. Separate a privilege
and its argument(s) with a colon, and separate arguments with a comma if there are more than one
argument for a privilege.
All Privileges
This table lists all privileges. Note that available privileges vary according to the model you purchased. For
example, a PDU without the outlet switching function does not have the privilege "switchOutlet."
Privilege
Description
acknowledgeAlarms Acknowledge
Alarms
adminPrivilege Administrator
Privileges
changeAssetStripConfiguration
Change Asset Strip
Configuration
changeAuthSettings
Change Authentication Settings
