Call 800.223.4185 for Technical Support
ADVANCED OPERATION
Groups
Use a LightSense™ wireless incandescent dimmer in conjunction with one or
more LightSense PSWCS Wireless Multilocation Controllers to control one
lighting circuit from multiple locations. Binding the PSWDI and PSWCS devices
together in the same Group enables them to work in exactly the same way, from
any of the control locations.
You can include other LightSense wireless devices in the Group. Just remember
that all devices in the Group operate when one member operates. If you
increase the brightness on one circuit in the Group, all circuits will increase
brightness.
Set the House ID (see Set House ID) before setting up Groups.
Creating a New Group
1. Go to any device that you want to include in the Group. Press . The device
LED flashes yellow, and all other devices in the House flash green.
You now have 5 minutes to complete this process.
2. To include or exclude a device in the Group press
on the device until the
LED changes color.
Yellow
flashing LED = Included in the Group
Green
flashing LED = NOT included in the Group
If you get to a device and it is NOT flashing, the 5 minute binding process
timer may have expired. Go back to step 1 and repeat.
3. Return to the device used in step 1 and press
to terminate Group binding.
All LEDs revert to solid green. Now, all the devices in the Group control their
load circuit in exactly the same manner.
Adding a Dimmer to a Group in an Existing System
1. Go to a device that is in the Group where you want to add the dimmer.
Press . The device LED and all members of the Group flash yellow. The
new dimmer flashes green.
2. Press on the new dimmer until its LED flashes yellow.
3. Return to the device used in step 1 and press . All LEDs are solid green.
Scene Control
The LightSense wireless incandescent dimmer may be easily incorporated into
room and whole house preset scenes. The
LightSense Installation Guide
provides more information about configuring scenes and presets.
Instructions for installation and use are included with the relevant LightSense
wireless room and whole house control devices. Application support information
and the
LightSense Installation Guide are available at www.passandseymour.com.