Catalogue number(s): 0 463 00/06/12/18/19/21/22/23
0 463 28/29/30/33/34/35/41/42/43
19" LCS
2
freestanding cabinets
Technical data sheet: F01424EN/01
Updated on: 24/10/2014
Created on: 21/02/2012
15/31
6. PLINTHS
(continued)
6.2 Plinth for cabling unit
When joining 19" LCS
2
freestanding cabinets via a cabling unit,
Cat. No. 0 464 64 is used to link the plinths of the joined cabinets (at
the front and/or rear).
Cat. No. 0 464 64 comprises a 100 mm high trap.
For a height of 200 mm, the number of traps must be doubled.
100
200
Cat. No. 0 464 64
Cat. No.
0 464 64 x 2
The trap is made of 1.5 mm thick steel with paint finish (same as
cabinets) and supplied with its fixing screws.
6.3 Linking interface
6.3.1 Presentation
The linking interface Cat. No. 0 464 66 provides protection and a
finish for the link between freestanding cabinets and cable ducts. It is
positioned to the right or left of a 600 mm deep cabinet equipped with
a 200 mm high plinth.
It is mechanically joined to the cabinet plinth.
The interface comprises:
- 3 corner blocks
- A front panel trap
- A cover
Its reversible cover with cut-outs allows for different cable entry
configurations.
6. PLINTHS
(continued)
6.3 Linking interface
(continued)
6.3.1 Presentation
(continued)
The linking interface helps to maintain the bending radius of the
cables:
U-shaped cable tray, see section 6.1.
6.3.2 Features
- Corner blocks and cover 2 mm thick steel + paint finish
(same as cabinets)
- Trap 1.5 mm thick steel + paint finish (same as cabinets)
- Supplied with black cable entry brushes (polyamide fibres)
and complete set of screws (apart from those for fixing to the floor)
(1)
Usable feedthrough area with brush: 110 x 435 mm
Fixing to the floor
600
600
120
(1)
160
120
(1)
435
435
75
200
478
478
14
