LEGRAND KEOR SPX 1000VA, Руководство по установке

Страница: 9 / 28

9
KEOR SPX
EN
Problem Possible Cause Solutions
The LED doesn’t
light up
The UPS is not on
Press the power switch again to turn on
the UPS
Battery voltage is too low Charge the battery at least 6 hours
Battery fault
Replace the battery. It is important to use
the same battery type with equal voltage
and capacity
CAUTION Servicing of Batteries
must be Performed by Trained
Personnel with Knowledge of Batteries
and the Required Precautions
The UPS remains always
on battery mode
Power cord loose Re-plug the power cord
The UPS continuously
beeps
UPS fault Contact your local reseller
Backup time too short
Battery voltage is too low Charge the battery at least 6 hours
Overload
Remove the loads. Before reconnecting
the equipments, please verify that the
load matches the UPS capability specified
in this manual
Battery defect
Replace the battery. It is important to use
the same battery type with equal voltage
and capacity
CAUTION Servicing of Batteries
must be Performed by Trained
Personnel with Knowledge of Batteries
and the Required Precautions
If any abnormal situations occur that are not listed above, please call your re-seller immediately.
5 Troubleshooting