www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
LTS_F-5355_091118
5. Fixture leads are marked: LED+ Circuit 1, LED – Circuit 1, LED+ Circuit 2 and LED – Circuit 2. Make connections
to Remote Driver output leads following Wiring Diagram, Figure 2.
SERVICE INSTRUCTIONS
6. Replace Wiring Cover and secure with wing nut.
7. Close door and secure rotating latches.
LTS series fixtures have no field serviceable parts.
LED module replacement may be done after the fixture is removed from service
1. Open door and remove wiring cover, see above.
2. Remove reflectors and disconnect LED module leads. See Figure 3.
Figure 2
Figure 3
RD-700
RD-700
LTS-B2 (396L)
LTS-B2 (600L/780L)
DRIVER
DRIVER OUTPUT -
LED + CIRCUIT 1
DRIVER
DRIVER
LED - CIRCUIT 1
LED + CIRCUIT 2
LED - CIRCUIT 2
LED + CIRCUIT 1
LED - CIRCUIT 1
DRIVER
DRIVER OUTPUT -
RD-700
DRIVER
DRIVER OUTPUT -
LED + CIRCUIT 1
LED - CIRCUIT 1
LTS- A2
(300L/390L)
