800.879.8585
www.legrand.us/wattstopper
No. 24907 – 09/16 rev. 1
© Copyright 2016 Legrand All Rights Reserved.
© Copyright 2016 Tous droits réservés Legrand.
© Copyright 2016 Legrand Todos los derechos reservados.
Wattstopper warranties its products to be free
of defects in materials and workmanship for a
period of five (5) years. There are no obligations
or liabilities on the part of Wattstopper for
consequential damages arising out of, or in
connection with, the use or performance of this
product or other indirect damages with respect
to loss of property, revenue or profit, or cost of
removal, installation or reinstallation.
Wattstopper garantit que ses produits sont
exempts de défauts de matériaux et de fabrication
pour une période de cinq (5) ans. Wattstopper
ne peut être tenu responsable de tout dommage
consécutif causé par ou lié à l’utilisation ou
à la performance de ce produit ou tout autre
dommage indirect lié à la perte de propriété, de
revenus, ou de profits, ou aux coûts d’enlèvement,
d’installation ou de réinstallation.
Wattstopper garantiza que sus productos
están libres de defectos en materiales y mano
de obra por un período de cinco (5) años. No
existen obligaciones ni responsabilidades por
parte de Wattstopper por daños consecuentes
que se deriven o estén relacionados con el
uso o el rendimiento de este producto u otros
daños indirectos con respecto a la pérdida
de propiedad, renta o ganancias, o al costo
de extracción, instalación o reinstalación.
WARRANTY INFORMATION
INFORMATIONS RELATIVES À LA GARANTIE
INFORMACIÓN DE LA GARANTÍA
TROUBLESHOOTING
Devices do not turn on with occupancy. If the LED, labeled “Grounded,” is not lit:
• Make certain that the power strip is securely plugged into a properly grounded and wired outlet.
• Check that the ON/OFF switch is in the “ON” position.
• Make certain that the cable connection between the personal sensor and the power strip is secure.
• Make certain that the personal sensor is positioned to view the desired coverage area. (See “Personal Sensor Placement.”)
Devices turn on without occupancy.
The sensor may be detecting people outside of the workspace.
• Reorient the sensor so that it does not view beyond the boundaries of the workspace.
The controlled devices turn off when the workspace is occupied.
• Change the personal sensor’s location or orientation within the workspace to increase the sensor’s detection of motion, especially
hand motion. (See “Personal Sensor Placement.”)
• Increase the personal sensor’s time delay setting. (See “Time Delay Setting.”)
The Protected LED is not lit.
• Turn the power strip off and then on. If the Protected LED remains off, the surge suppression feature has stopped working. The
power strip may need to be replaced. Call Technical Support.
NOTE:
Devices requiring surge protection should not be plugged into the power strip’s outlets when the Protected LED is unlit.
The Grounded LED is not lit.
• Electrical outlet may not be functioning properly. Switch to a properly grounded electrical outlet. Report to facility manager or
engineer for verification and repair.
These suggestions should help solve most problems. For further assistance, call Technical Support at 800.879.8585.
