10 Accessories
Outdoor Garden Cables:
RGL8 (2-core 1.3mm² 10m length)
RGL9 (2-core 1.3mm² 20m length)
RGLCL21/20 (2-core 2.1mm² 20m length)
RGLCL21/30 (2-core 2.1mm² 30m length)
RGLCL33/30 (2-core 3.3mm² 30m length)
RGLHSC15 (2-core 0.5mm² 15m length)
Connectors:
CDGLCC4 (pack of 4 cable connector)
Transformers:
RGLTR60
RGLTR105
RGLTR220
RGLTR400
RGLPCTAW20
Sensor & Timers
(Compatible only with 60VA -200VA transformers)
RGL10 (200W sunset timer)
DGLS150 (150W dusk to dawn sensor)
11 Troubleshooting
12 Maintenance
To prolong the life of your Gardenlights HPM recommends the following:
• Install away from salty or corrosive environments
• Install away from highly fertilised areas
• Do not sudmerse in treated water such as chlorinated pools
To keep your lights looking new, keep lenses free of dust and residue by wiping occasionally with a dry cloth, or warm soapy water if necessary.
If using soapy water, ensure that you thoroughly dry your light after cleaning.
Transformer
Load rating (incandescent lighting)
Load rating (LED lighting)
RGLTR60
60W
30W
RGLTR105
105W
50W
RGLTR220
200W
100W
RGLTR400
400W
200W
RGLPCTAW20
10W
5W
Problem
Possible Solution
The powerpoint is turned on,
but the lights are off.
1. The connections at the base of transformer may be loose. Tighten firmly
2. There is no power to the powerpoint, (Consult an electrician).
3. You may not have pierced the cable well enough with the metal spikes in the jaw-lock connectors. Check that
the cable insulation has been fully pierced by the spikes.
Some lights are working, one or
more are not.
1. If one or more of the lights are not working, first check the connection of the light to the cable (See
‘Connecting your garden lights’ section). If this is firm, check the globes by putting the ‘non-working’ globes
into a working fitting. Replace unserviceable globes, (If applicable).
One or more lights flicker.
1. The connection to the light is loose. (See ‘Connecting your garden lights’ section).
2. The globe is loose. Push in firmly, (Watch out that globe is not hot). (HPM recommends paper or cloth be used
to handle the globe).
8 Globe replacement
To replace lamp follow instructions for Globe Assembly.
Note: If lamps do not turn ON or flicker when powered ON, repeat steps for Globe Assembly to see if there is a loose contact.
9 Choosing a suitable transformer
The total wattage of your LED garden lights must not be greater than ½ of the rating of the transformer.
For example if the RGLTR60 60W transformer is used then adding up the wattages of each LED light (e.g 4 x 6W = 24W) should not exceed the 30W max load.
