Hang-Sure Mounting
Fix mounting bracket (supplied) firmly to timber or concrete.
4
5
Hanging the fan on the bracket
Connect the quick connectors
Hang-Sure Bracket
Hang the fan on the bracket. Ensure bracket guide pin is fitted into slot on ball joint and that all wires are clear of the ball joint.
Click the quick connect plug into the socket connector from the fan.
N
L
A. Connect supply wiring to the terminal block provided.
Refer to instructions for Remote Control Kits (CFREMOTEH) for installation and mounting requirements.
Hang-Sure Canopy
Tighten with 4 screws to the bracket. Make sure wires are not trapped in between.
6 Slide upper canopy into position and secure
2
3
Fixing of mounting bracket to ceiling
Supply connection to fan
Select a suitable location for the fan. Use the 2 coach screws provided (or similar) to make an attachment to a solid structural member.
Ensure the mounting method is capable of supporting a hanging weight of 30 kg.
N
L
N
L
Bracket
Supply wiring
Guide
pin
Slot
N
L
x 2 Screws
x 2 Screws
L
RCFL12H4WE only
RCF12H4 Series
2
3
The HPM ceiling fan comes complete with a capacitive 3-speed controller on a wall plate with standard 84mm fixing centres. Please
refer to instructions supplied with the speed controller for installation.
Connecting the speed controller
7
3 - Speed fan controller (ED3FCWE)
RCF12H4 Series
■
If intending to use a Remote Control kit (not supplied)
then do not mount this wall plate.
■
It is recommended to install a wall switch instead.
“IF INSTALLING A REMOTE CONTROL, IT MUST BE INSTALLED IN CONJUNCTION WITH A WALL SWITCH TO ISOLATE POWER.”
