Owner’s Manual of DA2131-V1
A
- 22 -
Step 2: configure Wireless Settings
There are five options (Disable, OPENWEP, SHAREDWEP, WPA-PSK, WPA2-PSK) for Wireless security
connection.
Figure 4-7
Step 2. Configure Wireless Settings
Object
Description
Network Mode
This field determines the wireless mode which the NWAP works on.
Frequency (Channel)
This field determines which operating frequency will be used. The
default channel is set to
AutoSelect
, so the NWAP will choose the
best channel automatically. It is not necessary to change the wireless
channel unless you notice interference problems with another nearby
access point.
Network Name (SSID)
Enter a value of up to 32 characters. The same name of SSID
(Service Set Identification) must be assigned to all wireless devices in
your network. The default SSID is set to be Legrand WiFi. This value
is case-sensitive. For example,
LEGRAND
is NOT the same as
Legrand.
Channel Bandwidth
Select the operating channel width 20 MHz or 20/40 MHz.
Security Mode
Disable:
No security required
OPENWEP / SHAREDWEP:
When you select WEP, please input 5, 13 (ASCII), 10 or 26
(HEX) characters for WEP Key.
WPA-PSK / WPA2-PSK:
You can enter ASCII characters between 8
and 63 characters or 8 to 64 Hexadecimal characters.
When you finish these settings, then click
Apply
button to save.
