Page
18
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
2.3.1 TCP/IP Setting
This page allows you to change the parameter for LAN and WAN interface.
2.3.1.1 LAN Interface Setup
Choose menu “
TCP/IP Settings
→
LAN Interface
”, you can configure the parameters for local area
network which connects to the LAN port of your Gateway. Here you may change the setting for IP
address, subnet mask, DHCP, etc.
Object
Description
IP Address
LAN IP Address of the Access Point
Default :
192.168.40.254
Subnet Mask
LAN mask of the Access Point
Default :
255.255.255.0
Default Gateway
Gateway IP Address
Default :
192.168.40.254
DHCP Server
You can select
Server
or
Disable
. If you select Disable, the DHCP
service of LAN port is disabled.
Default :
Server
DHCP Client Range
The first and last IP address that DHCP server assigns.
Default :
192.168.40.100 – 192.168.40.200
Static DHCP
It allows you reserve IP addresses, and assign the same IP address to
the network device with the specified MAC address any time it requests
an IP address
Default :
Disable
Domain Name
Set three alternatives Domain Name Server for LAN interface.
Default :
Null
802.11d Spanning Tree
Spanning Tree Protocol. You can select Enable or Disable.
Default :
Disable
Clone MAC Address
Your ISP may require a particular MAC address in order to connect to
the Internet. This MAC address is the PC’s MAC address that your ISP
had originally connected your Internet to. Type in this section to replace
the WAN MAC address with the MAC address of that PC.
