Overview
The EBMHS
-
BLV (passive infrared) presence detector
provides automatic control of lighting loads via a third party
control device.
Functioning as a presence detector, the unit can send
signal to signify occupancy. The unit can also send out an
analogue signal that corresponds to the light level.
A selection of fixing clips to allow the unit to me mounted in
or to the side of a luminaire are available.
All functionality is fully programmable using an IR handset.
Features
Miniature Integration Presence Detector
EBMHS
-
BLV
PIR Sensor
Detects movement within the unit
’
s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes
R
ed to indicate the following:
RJ45 connector
The sensor comes with a 300mm lead and RJ45 plug for
direct connection to the lighting control system. A CAT5
lead and coupler can be used to extend the lead length if
required.
Walk Test LED active
when movement is detected
Valid setting received
Sensor head
PIR lens
which covers...
IR Receiver
Light Level Sensor
Status LED
Product Guide
